At Utopia Koi we carry a comprehensive range of glue and sealants to cover the requirements of any Koi pond builder. Glue to bond flexible pipe through to sealants that cure underwater. Utopia Koi has it covered allowing you to order with ease and concentrate on the job in hand.
Pipe Glue & Sealants
Plastic Pipe Cement 725 Wet R Dry is suitable for use on PVC Pressure Pipe and may also be used on solvent weld pipe. Comes complete with brush attached to inside lid of can.
Recommended Directions for use:
- Ensure that all necessary works safe protection is worn
- Make sure all cuts are square, remove all burrs and clean to remove dirt, grease and moisture
- Check dry fit. A tight interference fit is essential if quick pressurisation is required
- Quickly apply a full, even coat of cement to pipe, then a thin, even coat to inside of fitting
- While cement is wet, immediately push pipe and fitting together
- Firmly hold joint for at least 30 seconds and then allow a further few minutes before applying pressure
- Full joint strength will be reached in 4 hours
Replace lid after use, store between 5°C and 20°C, use within 3 years of date on base of can.
Very fast cure, use in wet or dry conditions. PVC cement for all classes and schedules of rigid and flexible pipe.
Comes complete with brush attached to inside lid of can.
Griffon WDF-05 Wet & Dry Fast Curing Cement Solvent cement for joining PVC and ABS (flexible) tubes, coupling sleeves and fittings in Koi Ponds and Swimming Pool Pipework up to diameter 160mm. Can be used in wet conditions, but not below 5° C.
- Suitable for Wet and Dry Conditions
- Extremely fast drying
- For PVC and ABS
- Gap filling
- Recommended for flexible hose
- Brush included
WDF-05 is the perfect adhesive for bonding thick-walled PVC flexible hoses and rigid PVC pipes, joints and fittings. WDF-05, is a distinctive blue colour and is very fast drying. The thixotropic character makes it the suitable solvent cement to use for both tight and wide applications. WDF-05 can be used for pipe diameters up to 160 mm and a maximum pressure of 16 bar (PN 16).
Aqua Forte Super Strong Fix and Seal
Aqua Forte Super-Strong Fix & Seal
Super-strong Fix & Seal is a high quality permanent elastic glue & sealer. This product has the unique ability to seal different materials to each other & replaces/combines the qualities of all standard glues & sealers (i.e. silicone, acryl, butyl, etc.)
Used for sealing or connecting:
- Waterfall lips
- Skimmer faceplates
- Bottom drains
- Holes or joins in liners
Fix & Seal is 100% fish safe & UV resistant. End result can be painted.
Gold Label Under water Sealer
Gold label Underwater Sealer does exactly what the name says, Gold label Underwater Sealer is remarkable and it will seal everything and everything, stainless steel to stainless steel, it will stick steel to plastic, plastic to wood, wood to stone , stone to plastic and what’s more as the name suggests it can be used underwater.
Yes actually underwater, Gold label Underwater Sealer is a truly remarkable product , imagine being able to seal any leak without having to drain the pond and further more Gold label Underwater Sealer is completely safe for the fish or any other pond life.
Bonds all materials even under water:
- Butyl Rubber
PTFE Thread Sealing Tape
A standard grade thread seal tape of nominal thickness 0.075mm and density 0.4-0.5 g/cc, manufactured from 100% pure, virgin P.T.F.E. and containing less than 0.1% residual lubricant. Ideal for BSP fittings and suitable for use on hot and cold water systems.
PTFE Thread Sealing Tape is a toolbox essential for ensuring threaded seals are water-tight. Wrap around the thread 10 times.
PTFE Thread Sealing Tape Features:
- Provides water-tight seal
- 12mm width x 12m length
- 1 x roll – 12mm x 12m